The findings are consistent with the results of other analyses, namely, those finding that most debris at the Fukushima Daiichi-2 NPP is at the bottom of the reactor pressure vessel (RPV). The power utility has been collecting available information to proceed toward the removal of the debris, seen to be the greatest challenge in the decommissioning process.<\/p>\n
Core meltdowns occurred at Units 1 to 3 during the accident, generating debris. From the outset, TEPCO has been injecting water to cool it. More recently, the company gradually decreased the volumes of injected water from 4.5 to 3.0 tons per hour to provide a processing cushion for the facilities treating and purifying the contaminated water that had accumulated in the turbine building basements and other places. That became possible because calorific values had dropped substantially during the six years since the accident.<\/p>\n
TEPCO made use of records of dozens of thermometers installed in each of the RPVs and elsewhere at Units 1 to 3. At Unit 1, temperatures near the control rod drive mechanism below the RPV rose as the volume of injected water decreased. The power utility believes that the debris that fell toward the bottom of the RPV was caught by the mechanism, becoming a heat source. Most of the debris is thought to have dropped to the bottom of the containment vessel.<\/p>\n
At Unit 2, the temperature at the bottom of the RPV rose distinctively, so TEPCO thinks that there may be debris present there. At Unit 3, meanwhile, the temperature of the water in the containment vessel was higher than at the bottom of the RPV. TEPCO believes that most of the debris there dropped from the RPV, remaining at the bottom of the containment vessel.<\/p>\n